<input id="iwusk"></input>
<input id="iwusk"></input>
  • <input id="iwusk"><label id="iwusk"></label></input><menu id="iwusk"></menu>
  • <code id="iwusk"></code>
  • <strong id="iwusk"><label id="iwusk"></label></strong>
     
    Home  |  About ANYI   |   Products   |   Service + Support   |   Testimonials   |   Expertise   |   Contact   |     
    Standard Reference
         Artifacts
    Precision Step Gauges
    Swivel Support
    Module masters
    Gauge blocks
    Slide Calipers
    Digital Calipers
    Dial Calipers
    Vernier calipers
    Digital Scale Units
    Depth Gauges
    Digital Depth Gauges
    Dial Depth Gauges
    Vernier Depth Gauges
    Height Gauges
    Digital Height Gauges
    Dial Height Gauges
    Vernier Height Gauges
    Micrometers
    Micrometer Heads
    Outside Micrometers
    Inside Micrometers
    Depth Micrometers
    Indicators
    Thickness gauges
    Indicators
    Special Calipers
    Special Designs
    Accessories
    Clinometers
    Stands
    Data Interfaces
    Surface Plates
    Others
    You are here: Home >> Expertise

    Expertise

    How to Read a Digital Caliper

    Digital calipers are becoming more and more popular due to their easy operation, multifunctions and high resolution. They are free from parallax and visual interpolation. Some models like IP65 and IP67 can be exposed to water, coolant, dust and damp like vernier calipers.Digital calipers of smaller measuring ranges (<300mm) are usually with depth rod. Therefore, they can measure I.D, O.D, Step and Depth. At present, the most precision digital calipers in the world have been successfully manufactured by ANYI INSTRUMENT CO., LTD in China.Its resolution is 0.001mm.Its accuracy is ?.005mm from 0-50mm, ?.006mm 50-100mm and ?.009mm from 100-150mm. Not like ordinary digital calipers using copper plating glass-epoxy laminate stator, this micron digital caliper uses glass stator which has very small coefficient of thermal expansion.

    Parts of a digital caliper

    Clean the measuring faces before taking measurement. Close the jaws and press the Zero button to set "0", then measurement can be taken. Reading can be obtained directly from the display window (as shown in the image below)

     

    [ << Back ]          

     
     
    CopyRight © 2009 Anyi Instrument Co.,Ltd All Rights Reserved

    49ѡ7¼